Lock Installation & Lock Repair in Brevard County

Professional Lock Installation Done Right

A lock is only as strong as its installation. A premium deadbolt mounted in a misaligned door, with a strike plate held by short screws, can be defeated with a single kick. At Locksmith of Brevard, we install new locks with the precision they need to work smoothly and resist forced entry for years. From a single deadbolt to every door in an office building, we bring the hardware, tools and experience to do the job right the first time.

Lock Installation Services

Deadbolts

Single cylinder, double cylinder and keyed or thumb-turn deadbolts for front doors, back doors and garage entries. We bore new doors, install reinforced strikes with long screws anchored into the framing, and make sure the bolt fully extends every time.

Knobs, Levers and Handlesets

Upgrade the look and function of your doors with new knobs, ADA-friendly levers or decorative handlesets. We can match finishes throughout your home or business and key everything alike so one key works on every door.

High-Security Locks

High-security cylinders resist picking, bumping and drilling, and their patented keys cannot be copied without authorization. They are ideal for homes that want maximum protection and for businesses that need tight key control.

Keypad and Smart Locks

We install mechanical push-button locks, electronic keypads and Wi-Fi or Bluetooth smart locks. Learn more on our smart lock installation page.

Commercial Hardware

Mortise locks, cylindrical locks, storefront deadlocks, exit devices and door closers for businesses of every size. See our commercial locksmith services.

Specialty Locks

Sliding door locks, gate locks, mailbox locks, cabinet and drawer locks, and secondary locks such as door guards and anti-lift bars for sliders.

Lock Repair Services

Not every lock problem requires a new lock. Many issues can be repaired quickly for much less than replacement. Common repairs we handle include:

• Sticking or hard-to-turn keys. Usually caused by dirt, corrosion or worn pins. Cleaning, lubrication or repinning often restores smooth operation.
• Deadbolts that will not extend. Typically a door alignment issue. We adjust the strike or the door so the bolt throws freely.
• Latches that do not catch. Often caused by settling doors, worn latches or loose hinges, all of which we can correct.
• Loose or wobbly handles. Tightening or replacing internal components fixes most loose hardware.
• Broken keys stuck in locks. We extract the broken piece without damaging the cylinder and cut a new key.
• Damage after a break-in. We repair or replace damaged locks, strikes and door frames and secure your property the same day.

Choosing Quality Hardware

We help you choose locks based on how a door is used, the level of security you need, and your budget. A helpful reference is the ANSI/BHMA grading system from the Builders Hardware Manufacturers Association, which tests locks for cycles of use, strength and security. Grade 1 hardware is built for heavy commercial use, Grade 2 is excellent for residential exterior doors and light commercial use, and Grade 3 meets basic residential standards.

In Brevard County, finish and corrosion resistance matter too. Homes and businesses near the Indian River Lagoon and the ocean, including Melbourne Beach, Indialantic, Satellite Beach, Cocoa Beach and Merritt Island, benefit from hardware with corrosion-resistant finishes and internal parts. We will point you to products that hold up in our coastal climate.

Repair or Replace? Our Honest Approach

When you call us about a problem lock, we will diagnose the root cause before suggesting a fix. If an adjustment or repair solves the problem, that is what we recommend. If the lock is worn out, poorly made or no longer secure, we explain why replacement makes sense and give you options at different price points. If you simply need new keys, rekeying may be all you need.

Our Installation Process

1. Assessment. We check the door, frame, hinges and existing hardware.
2. Recommendation. We suggest hardware that fits your door and security goals, with a clear price.
3. Installation. We prep the door, install the lock, and reinforce the strike.
4. Alignment and testing. We adjust until the latch and bolt operate smoothly, then test every key.
5. Clean-up. We leave your door looking finished and your space clean.

Serving All of Brevard County

We install and repair locks in Melbourne, Palm Bay, West Melbourne, Viera, Rockledge, Cocoa, Merritt Island, Titusville and the beach communities. Our mobile service means we bring the shop to you.

Signs It Is Time to Replace Your Locks

Locks do not last forever, especially in the Florida climate. Consider replacement when you notice any of the following:

• Visible corrosion or pitting on the finish or keyhole, common within a few miles of the coast.
• Keys that wiggle or stick even after cleaning and lubrication, a sign of worn internal parts.
• Loose handles or deadbolts that cannot be tightened because internal components are broken.
• Outdated or low-grade hardware that offers little resistance to picking, bumping or forced entry.
• Damage from a break-in attempt, including bent bolts, cracked housings or pry marks.
• A desire for new features, such as keyless entry, a different finish, or ADA-compliant levers.

Upgrades That Make a Big Difference

Reinforced Strike Plates

The strike plate is the metal piece on the door frame that receives the bolt. Standard strikes are held by short screws that only reach the thin door jamb. A reinforced strike with three-inch screws anchors into the wall framing and dramatically improves resistance to kick-ins. It is one of the most cost-effective security upgrades available.

Door Edge and Frame Reinforcement

For doors that have been forced before, or for homeowners who want maximum protection, door edge wraps and frame reinforcement kits help prevent the wood from splitting around the lock.

Hinge Security

Replacing at least one short screw in each hinge with a long screw ties the hinge side of the door into the framing as well, so the door is secured on both sides.

Keyed-Alike Hardware

When installing several new locks, we can key them all alike so a single key opens every door. It simplifies life and reduces the number of keys in circulation.

Lock Installation for Businesses and Rental Properties

Commercial and rental properties need hardware that stands up to heavy use and makes key management easy. We install Grade 1 and Grade 2 commercial locks, interchangeable core systems, storefront hardware, door closers and exit devices. For landlords, we can install durable hardware throughout a property and key it into a master key system so managers can access every unit while tenants hold only their own key.

Same-Day Service

Because our service vehicles carry a wide selection of residential and commercial hardware, most installations and repairs are completed the same day we arrive. If you need a specialty finish, high-security cylinder or specific smart lock model, we can order it and schedule installation at a time that works for you.

Lock Installation FAQs

Can you install a lock I already bought?

Yes. We are happy to install customer-supplied hardware and will let you know if there are any compatibility concerns with your door.

How long does it take to install a deadbolt?

On a pre-drilled door, usually 20 to 30 minutes. New doors that need boring take a little longer.

Can you match my new locks to my existing key?

In most cases, yes. We can key new locks to your current key or rekey everything to a new one. See more on our FAQ page.